Arcam AVP700 AVP-700 HDMI XLR High-end 7.1 Surround-Vorstufe Prozessor Heimkino Preamp NP:2175,-€

SKU
375
-34%
Sonderpreis 459,00 € Regulärer Preis 699,00 €
Nicht lieferbar

Don't Miss Out! This promotion will expires in

Farbe: schwarz, inkl. Fernbedienung und Anleitung als Kopie.

Das Gerät ist optisch aufbereitet worden und befindet sich in sauberem Zustand. Funktion ist geprüft und gegeben.

Artikelzustand: gebraucht. Gebrauchsspuren können vorhanden sein. Grobe Fehler oder Beschädigungen sind, falls vorhanden, extra erwähnt und abgebildet.

Versand erfolgt aufwendig verpackt und gut gepolstert als versicherter Paket grundsätzlich mit DHL. 

Artikel unterliegt der Differenzbesteuerung nach § 25 a UStG, die Mehrwertsteuer ist nicht ausweisbar.

Inkl. 12 Monate Gewährleistung.

 

Anbei ein paar Ausstattungsdetails der Arcam AVP700 Surround-Vorstufe:

- 2 x HDMI in / 1 x out

- YUV Ausgang mit Hochkonvertierung

- XLR Vorverstärker Ausgänge für alle 7 Kanäle

- Kanal 6+7 auch für Bi-Amping Betrieb schaltbar

Weitere Daten und Eigenschaften entnehmen Sie bitte der Homepage des Herstellers und dem Internet.

 

Technical specifications

Analogue audio inputs

Line input sensitivity

0.5/1/2/4V rms (2V rms normal)

Overload margin

+2dB

Input impedance

>22kΩ

Analogue audio outputs

Level (at 0dB gain)

2V rms

Maximum level

3.5V rms

Impedance

600Ω

Signal/Noise ratio (analogue input)

100dB unweighted (measurement bandwidth 22kHz)

Signal/Noise ratio (digital input)

100dB unweighted (measurement bandwidth 22kHz)

THD+N (analogue input)

90dB (0.003%) (measurement bandwidth 22kHz)

THD+N (digital input)

90dB (0.003%) (measurement bandwidth 22kHz)

Frequency response

20Hz–20kHz (±0.25dB)

Headphone impedance

390Ω

Video inputs and outputs

Input and output impedance

75Ω

Composite video level

1V

HF response to (-3dB)

12MHz

S-video level (Y/C)

1V/0.28V

HF response to (-3dB)

12MHz

HQ (component) video

level (Y/Cr/Cb)

1V/0.5V/0.5V

level (R/G/B)

1V/1V/1V

HF response to (-3dB)

150MHz

Digital audio inputs

Coaxial connection (level/impedance)

0.5V/75Ω

Acceptable sampling frequencies

44.1kHz, 48kHz and 96kHz

Digital output level/impedance

0.5V/75Ω

Trigger outputs

Output D.C. voltage level(excl. RGB status)

12V ±1V

Allowable load

30mA max. (min. 400Ω)

Remote inputs and output

Signal

modulated 36kHz carrier

Coding

Philips RC-5

General

Mains voltage

110V and 230V (switchable)

Power consumption (maximum)

120VA

Dimensions W x D x H (including feet)

430 x 420 x 145mm

Weight (net)

8.3kg

Weight (packed)

13.5kg

Supplied accessories

Mains lead, CR80 remote control, 2 x AA batteries

E&OE. All specification values are typical unless otherwise stated.

The AVP700 builds on Arcam's impressive history as a leader in high performance AV products and together with its natural partner, the new P1000 power amplifier, allows a truly spectacular multichannel sound system to be created.
The AVP700 has been designed
for home cinema enthusiasts who insist
on products that deliver superlative
performance on both movies and music.
The use of a separate preamp processor enables the use
of power amplifiers or connects straight to an active
speaker setup.
The AVP700 incorporates HDMI switching for use with
today’s high performance screen and tomorrow’s high
definition set top boxes.
AVP700 features
• Dolby Digital EX, DTS ES, DTS 24/96 &
Dolby Pro Logic IIx decoding
• 2-way HDMI switching
• balanced audio outputs
• HDTV compatible component / RGB switching
• composite and S-video up conversion to
component or RGB
• 2nd zone output with audio and video
• 2-way RS232 control port
• FM/AM tuner with RDS on board
• audiophile sound quality for movies and music 

Lieferzeit 2-3 Tage
Condition used
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto